SEGWAY RMP 440 SE
The RMP 440 SE utilizes a small enclosure which provides 2 channels of DC power (12 V and 24 V default) and can be placed anywhere along the mounting rails.
The RMP 440 SE leverages all of the redundant safety features of the Segway® Personal Transporter (PT). The motor controllers and brushless DC drive motors are each fully redundant, allowing component failures to be handled smoothly and safely.
Segway’s entire line of RMPs shares a single communications structure. This makes it easy to change mobility platforms, even at a late stage in development. If your requirements change you don’t have to worry about rewriting your control software; simply swap one RMP for another and keep going.
The RMP 440 SE is powered by five lithium-ion batteries, which provide a run time of ~8 hours of operation or ~24 hours in standby. The 440 SE can also wade through water up to 250mm (standard configuration) or 400mm (inverted gearboxes), operate in temperatures of 0-50° C, traverse slopes up to 30°, and meets IP66/NEMA 4 standards. All its military grade bulkhead connectors are rated for Severe Wind and Moisture Problem (SWAMP) areas.
Overall Dimensions – 1105 x 842 x 607 mm
Platform Weight – 106 kg (235 lbs)
Clearance – 272 mm (10.7 in)
Max Payload – 180 kg (400 lb)
Communication – Ethernet, CAN, USB
Battery Chemistry – LiFePO4
Runtime – up to 24 h
Charge Time – 2-3 h
Propulsion Battery Capacity – 1520 Wh
Auxiliary Battery Capacity – 380 Wh
Max Speed – 8 m/s
Max Slope – 30°
Peak Torque (per wheel) – 100 N-m
Max Range – 50 km (30 mi)
Ingress Protection – IP66