Specs
Segway Drift W1
General
| Dimensions | Unit: 12.5×10.6×8.7 in (318×269×219 mm) Payload: 22-220 lbs (10-100 kg) |
|---|---|
| Weight | Net (single wheel): Approx. 7.7 lbs (3.5 kg) |
Rider
| Recommended Age | 6+ years old. See the weight limit |
|---|
Machine Parameters
| Max. Speed | Approx. 7.5 mph (12 km/h) Top speed will vary based on riding style and remaining battery life. Top speed will be reduced when the battery is low. |
|---|---|
| Typical Riding Time | 45 minutes |
| Max. Slope | 10° |
| Traversable Terrain | Flat, hard ground free of bumps or obstacles |
| Operating Temperature | 14-104°F (-10-40°C) |
| Storage Temperature | -4-122°F (-20-50°C) |
| IP Rating | Mainframe IP54/ Battery pack IPX6 |
| Max. Storage Time | Approx. 180 days/100% power; Approx. 30 days/30% power |
| Charge Time (for both mainframes) | Approx. 3 hours |
| Nominal Voltage | 22.2 VDC |
| Max. Charging Voltage | 25.2 VDC |
| Charging Temperature | 32-104°F (0-40°C) |
Battery
| Nominal Capacity | 44.4 Wh |
|---|---|
| Battery Management System | Over-voltage, under-voltage, over-current, short circuit, and over-heating protection. Auto-sleep, auto-balance, and auto-wake. |
Motor
| Max. torque (single wheel) | 6 Nm |
|---|---|
| Output Power | 37.5 W |
Charger
| Input Voltage | 100-240 VAC |
|---|---|
| Output Voltage | 25 ± 0.2 VDC |
| Output Current | 1.5A |
Download
Segway Drift W1
Manuals and Guides
| User Manual | |
|---|---|
| Warranty |
Videos
Segway Drift W1
Intro
FAQ
Segway Drift W1
Troubleshooting
Re-Calibration
There is a very simple recalibration procedure that will reset your e-Skate.
Power off
Set the e-Skate upside down on a level surface
Power on
The unit will beep and the wheel will begin turning slowly in alternating directions
Power off
Set the e-Skate right side up
Power on
The e-Skate should be recalibrated and function properly
You may need to repeat this procedure multiple times to get a full calibration